Resources
Blog GTM Efficiency 7 min read

How to Choose a Lead Generation Agency

Choosing a lead generation agency: four questions to ask before you sign, three models compared and who should own the system after the project.

Updated on
Explore with AI
Share on LinkedIn

Key takeaways

  • You recognise a good lead generation agency by its groundwork: it sizes your market before you sign.
  • List quality is a separate check, with a suppression list and two rounds of email verification, before the first message goes out.
  • The most important contract question is who owns the system once the project ends.
  • Success is measured on deals in the CRM, not on the number of booked meetings.

How do you recognise a good lead generation agency?

On paper most proposals look alike: define the audience, find contacts, write sequences, deliver meetings. The difference shows in two places a pitch rarely covers. The first is the work before the contract, the second the handover after it.

Graphic: Four questions for any lead generation agency. Where an answer is missing, the work behind it usually is too. Market: How large is my addressable market, and where does the estimate come from?; List: Suppression list, two rounds of email verification, holding beats guessing [Clay, lemlist]; Ownership: Tables, sequences and CRM data sit in your accounts; Measurement: Deals and pipeline in the CRM, not booked meetings [HubSpot]

Our view: whether an agency delivers pipeline or just meetings shows in how it checks your market and in what you own at the end. An agency that answers both openly builds a system that keeps running after the project.

Before the four questions, it helps to look at the models, because every answer sounds different depending on what you pay for.

Which models exist, and which one fits you?

You will meet three models in the market, and each fits a different starting point. It only goes wrong when the model does not match your goal.

Swipe left or right to see all columns.

ModelWhat you pay forFits whenWhat you own afterwardsSource
Pay per meetingeach booked meetingyou want a quick test of whether a segment responds at allthe meetings, rarely the listSalesPlaybook assessment
Monthly retainer with meeting deliveryongoing outreach run by the agencyyou want to outsource for good and build no team of your ownwhatever the contract saysSalesPlaybook assessment
System build with handovermarket, data, workflow and measurementnew business should keep running in-housetables, sequences and CRM dataSalesPlaybook assessment

SalesPlaybook works in the third model. That does not make the other two wrong: if you only want to test whether a segment responds, you do not need a whole system. If you plan pipeline over several quarters, though, put the four questions below to every provider.

Did the agency size your market before you signed?

Many campaigns fail before the first message goes out, because the market is too small for the volume that was booked. Then someone loosens the criteria, and the list fills up with companies that would never buy.

A serious agency therefore estimates the size of your addressable market before the contract and picks the model from that. After signing, it builds a more precise target market and shows it to you at kickoff using concrete sample companies. You say which ones fit and which do not. Only then do you and the agency fix the target profile, exclusions and budget.

Our view: infrastructure follows market size. Buying inboxes and domains first and looking for the market afterwards fills capacity, not pipeline.

So ask in the first call: "How large is my market by your estimate, and where does the figure come from?" An agency that can only answer after kick-off is selling you volume before fit.

Deep Dive Guide · 28 pages · free

From signal to sales pipeline

Whether your market carries volume, which three to five signals count and where the chain would break. Plus the checks before the first send.

Explore guide

How does a row get onto the list, and how does it come off again?

One wrong message to an existing customer costs more trust than ten good meetings earn. That is why a separate check belongs between enrichment and sending.

Here is how it works with us. First we ask for your suppression list: customers, partners and everyone who does not want to be contacted. Then we check names, fields and matching. We verify every email address twice, once in Clay during enrichment and again with Bouncer in lemlist before sending. Anything still ambiguous goes onto a hold pile. We delete nothing and guess nothing; you decide what happens to it.

Our view: holding beats guessing. A row nobody can match with confidence does not belong in a live sequence.

That this care pays off shows in a project where enrichment and sending ran through Clay and every result flowed back into HubSpot: node.energy: 5x More Demos with AI-Powered Outbound on Clay & HubSpot.

Want to know how large your addressable market really is?

Free · 60 minutes · no pitch · a straight fit-or-no-fit answer

Book Strategy Call

Who owns the system after the project?

If the contract ends and the data stays with the agency, you start from zero with the next provider. This question is almost never asked in the first call and almost never settled in the contract.

It covers three things: the tables in Clay with the target market and enrichment, the sequences in lemlist with their copy, and the results that flow back into HubSpot. If all three sit in your accounts, you can continue the work or hand it to another team. If they sit with the agency, you have bought meetings, not a system.

A clean handover therefore states the version of the target market, the counts per list, the records on hold and who is responsible from tomorrow. If one of these is missing, the handover is not finished.

Our view: ownership is a contract question, not a favour. Get it in writing before you sign whose accounts the work lives in.

How do you measure whether it works: meetings or pipeline?

Meetings are easy to count and easy to dress up. A meeting with someone who will never buy looks the same in the report as a meeting with your next customer.

That is why we measure on the deal in the CRM. In HubSpot we tie every reply, every meeting and every deal to the contact and the campaign. After a few months you see which segments bring revenue, not just which ones reply. Three published projects show what that can look like in numbers.

Swipe left or right to see all columns.

ProjectChannelResult, as worded in the case studySource
node.energyOutbound with Clay and HubSpot5x More Demos with AI-Powered Outbound on Clay & HubSpotnode.energy case study
PaymiraOutbound engineCHF >1m in sales pipeline from 5,000 contacts in under a yearPaymira case study
CaliboLinkedIn400k Deal closed via LinkedIn GTM in 4 MonthsCalibo case study

All three results measure pipeline or deals, not meetings. That is the measurement to demand from any agency, whichever model you choose.

Which questions should you ask in the first call?

Six questions separate the proposals that hold up from the ones that only sound good.

  1. How large is my addressable market by your estimate, and where does it come from?
  2. Will you show me sample companies from the list before launch so I can approve them?
  3. How do you handle my suppression list, and what happens to contacts that are ambiguous?
  4. How often, and with what, do you verify email addresses before sending?
  5. Whose accounts hold the tables, sequences and CRM data after the project?
  6. How do you measure success: on meetings or on deals in the CRM?

Clear recommendation

You only want to test whether a segment responds: take a pay-per-meeting model and cap it at one quarter.

You want to outsource new business for good: a retainer fits, but settle in writing who owns the data first.

You want new business to keep running in-house: choose the system build with handover and insist on all four questions.

The groundwork gives the agency away

You now have the four questions: market before the contract, a check before sending, ownership after the project, measurement on the deal. Take the proposals in front of you and put these questions to each. Where an answer is missing, the work behind it usually is too.

Free · 60 minutes · no pitch · a straight fit-or-no-fit answer

Written by

Manuel Hartmann

Manuel Hartmann

Founder & CEO

LinkedIn

Author of “Scaling B2B Buyer Trust”. More than 15 years of GTM experience, including Tesla, WEF and Accenture. Keen boxer, snowboarder and musician.

Frequently asked questions

How do I recognise a good lead generation agency?
A good lead generation agency sizes your addressable market before the contract, checks every row of the list before sending and hands you the tables, sequences and CRM data at the end.
Which model fits: pay per meeting, retainer or system build?
Pay per meeting fits a quick test of one segment, a retainer fits outsourcing for good, and a system build with handover fits when new business should keep running in-house.
Who should own the data after the project?
The tables in Clay, the sequences in lemlist and the results in HubSpot should sit in your own accounts, otherwise you start from zero with the next provider.
How should I measure an agency's success?
Measure success on deals and pipeline in the CRM, because a meeting with someone who will never buy counts in the report exactly like a meeting with your next customer.

Resource download

Unlock the download.

Enter your email address and the download starts right away.

PDF, immediately after submission · No newsletter, no call

We process your email address in HubSpot to provide this resource. See the privacy policy for details.

Could your company be the next operating system story?

Use a free 60-minute Strategy Call to clarify the revenue constraint, fit or no fit and the right next step. No pitch.

Book Strategy Call